Siemens MICROMASTER 440 MM440 Inverter Drives

The Siemens MICROMASTER 440, commonly known as the MM440, is an industrial variable frequency drive designed for flexible speed and torque control of three-phase AC motors. Common MM440 inverter order numbers begin with 6SE6440, making the series easy to identify when sourcing replacement units, spare drives or compatible industrial automation components.

Built with microprocessor-based control and IGBT power technology, the Siemens MM440 provides configurable motor control, reliable operation and adaptable drive performance for a wide range of industrial machines. The series covers inverter ratings from 0.12 kW to 250 kW, depending on voltage class, frame size and specific product configuration.

What Is a Siemens MICROMASTER 440 Inverter?

A Siemens MICROMASTER 440 inverter regulates the speed, direction and torque response of an AC motor by varying the output frequency and voltage supplied to the motor. This allows industrial equipment to operate with better process control than simple direct-on-line motor starting.

The MM440 series is particularly suitable for applications requiring configurable drive control, controlled acceleration and deceleration, braking support, PLC integration and adaptable parameter settings. Depending on the application and configuration, it can be used in machinery, material handling systems, conveyor drives, pumps, fans and other industrial motor-control installations.

For plants that already use Siemens MICROMASTER drive technology, sourcing the correct MM440 replacement unit is important for maintaining equipment continuity and minimizing modification work during servicing or machine restoration.

Key Features of the Siemens MM440 Series

Flexible Motor Control

The Siemens MM440 supports multiple control strategies, including conventional V/f control and vector-control-related modes for applications requiring improved speed regulation or torque performance. This makes the drive suitable for both constant-torque and variable-torque operating requirements.

Broad Power Range

The MICROMASTER 440 family is available in a wide selection of ratings, with the official operating documentation covering drives from 0.12 kW up to 250 kW. Actual voltage, output current, frame size, overload capacity and filter configuration vary by individual 6SE6440 order number.

Communication and Automation Integration

The MM440 can be integrated into industrial automation systems through configurable input/output functions and optional communication solutions such as PROFIBUS modules. This supports the exchange of run commands, reference values, status signals and diagnostic information between the inverter and higher-level control systems such as PLCs.

BICO Signal Interconnection

One of the practical engineering capabilities of the MM440 is its BICO signal interconnection concept. BICO enables internal signal sources and destinations to be assigned through parameters, giving engineers greater flexibility when configuring operating commands, feedback signals, setpoints and process-related functions. The Siemens operating documentation describes BICO connectors and binectors as part of the drive’s configurable signal architecture.

Controlled Stopping and Braking Options

The MM440 provides configurable stopping behavior for different machine requirements, including ramp-down stopping, coast stopping and fast stopping functions. Brake resistor and braking-unit selection must match the specific inverter model and engineering requirements; Siemens warns that unsuitable braking resistor selection can damage the inverter and create safety risks.

Protection and Diagnostic Support

Industrial drive applications require reliable monitoring of both the inverter and motor. The Siemens MM440 includes operating status, warning and fault handling functions, with messages accessible through compatible operator panels and parameters. Correct motor data configuration is important for effective motor overload protection and proper operation.

Siemens MICROMASTER 440 Technical Overview

Technical Item	General Series Information
Manufacturer	Siemens
Product Family	MICROMASTER 440 / MM440
Product Type	Variable Frequency Drive / Frequency Inverter
Common Order Number Prefix	6SE6440
Motor Type	Three-Phase AC Motor Applications
Power Range	0.12 kW to 250 kW
Power Technology	IGBT-Based Output Stage
Control Options	V/f Control and Vector-Control-Related Modes
Communication Options	Optional PROFIBUS and system communication accessories
Engineering Functions	BICO signal interconnection, configurable parameters and diagnostics
Stopping Functions	Ramp stop, coast stop and fast stop functions
Typical Use	Industrial motor control, machine drives and replacement applications

Important: Individual specifications must always be verified from the complete Siemens order number and product label. A product such as 6SE6440-... may differ in voltage, power rating, overload capability, EMC filter arrangement, physical frame size and supported accessories.

Industrial Applications of Siemens MM440 Drives

The Siemens MICROMASTER 440 inverter was developed for industrial motor-control duties where flexible operation and configurable drive performance are required. Typical application areas include:

• Conveyor belts and material transport systems
• Industrial production machines
• Pumps and fan systems
• Machine tool auxiliary drives
• Packaging and handling equipment
• Replacement or maintenance of existing Siemens drive installations
• PLC-controlled motor applications requiring adjustable speed operation

In automated equipment, an MM440 inverter can receive operating commands and speed references from a controller while transmitting operating feedback, fault status or drive-related signals back to the control system. This makes it suitable for machinery where motor behavior forms part of the overall process logic.

MM440 Commissioning and Parameter Setup

Correct commissioning is essential when installing a Siemens MM440 inverter or replacing an existing unit. A typical commissioning process includes the following stages:

1. Parameter Reset

A parameter reset returns the inverter to its defined factory setting state when a new configuration is required or when previous parameters are no longer suitable for the application.

2. Quick Commissioning

Quick commissioning adapts the inverter to the connected motor and the required operating method. Before commissioning, key information should be available, including:

• Motor nameplate data
• Supply frequency
• Command and setpoint sources
• Minimum and maximum frequency requirements
• Acceleration and deceleration times
• Required control mode

Siemens specifies that quick commissioning can be performed using optional operator panels such as the BOP or AOP, or through PC tools including STARTER or DriveMonitor.

3. Application-Specific Configuration

Once the basic motor-drive combination is operating correctly, further parameters can be adjusted according to the machine process. These may include speed limits, ramp profiles, digital input assignments, output signals, communication settings, braking behavior and diagnostic functions.

Commissioning, wiring and repair work should only be performed by qualified personnel familiar with industrial drives and the relevant safety procedures. Siemens states that MICROMASTER drives operate at hazardous voltages and must not be used as an emergency-stop mechanism.

How to Select the Correct Siemens MM440 Replacement Drive

When purchasing an MM440 inverter for replacement or maintenance use, selecting only by the general series name is not enough. The complete order number should be confirmed before quotation or installation.

Please check the following details:

Selection Detail	Why It Matters
Complete Part Number	Identifies the exact inverter configuration
Input Voltage	Must match the available power supply
Rated Output Power	Must suit the connected motor and load
Output Current	Important for correct motor matching
Frame Size	Affects cabinet space and installation dimensions
Built-In Filter Configuration	May affect EMC requirements and compatibility
Braking Requirement	Determines whether suitable braking components are needed
Operator Panel / Communication Module	Required for control and system integration needs
Product Condition	Confirm whether new, used or refurbished supply is required

For accurate sourcing, providing a photograph of the existing inverter nameplate is strongly recommended. This helps prevent errors when multiple MM440 products have similar appearances but different electrical specifications.

Siemens MM440 Inverter Supply and Replacement Support

We supply Siemens MICROMASTER 440 inverter products for industrial replacement, maintenance and spare-parts requirements. Whether you are searching for a specific 6SE6440 inverter, replacing a failed MM440 drive or maintaining an existing Siemens-based machine, our team can assist with product identification and quotation based on your required part number.

For faster enquiry handling, please provide:

• Siemens order number
• Required quantity
• Product condition requirement
• Nameplate photograph, where available
• Destination country
• Any required delivery schedule

Frequently Asked Questions About Siemens MICROMASTER 440

What is the Siemens MICROMASTER 440?

The Siemens MICROMASTER 440, also called MM440, is an industrial variable frequency drive used to control the operation of three-phase AC motors in adjustable-speed drive applications.

What is the common part number prefix for Siemens MM440 inverters?

Many Siemens MICROMASTER 440 inverter products use order numbers beginning with 6SE6440. The full order number must be checked to identify the exact voltage, power and configuration.

What is the power range of the Siemens MM440 series?

According to Siemens operating documentation, the MICROMASTER 440 inverter series covers ratings from 0.12 kW to 250 kW. Actual specifications depend on the individual model.

Can an MM440 inverter communicate with a PLC?

Yes. The MM440 supports configurable I/O control and can be used with optional communication solutions, including PROFIBUS-related integration, depending on the installed hardware and automation system configuration.

Can I replace one MM440 inverter with any other MM440 unit?

No. Replacement should be based on the complete Siemens order number, voltage rating, power rating, current specification, frame size and required functions. Similar-looking MM440 drives may not be electrically or mechanically interchangeable.

What information is required for an MM440 quotation?

Please provide the complete Siemens part number, quantity required, preferred condition and a clear photo of the original nameplate where possible. This enables more accurate product matching.

Request a Quote for Siemens MICROMASTER 440 Inverters

Looking for a Siemens MICROMASTER 440 inverter or a specific 6SE6440 model? Send us your required part number or product nameplate photo for identification and quotation support.

Contact us today for Siemens MM440 inverter availability, replacement sourcing and worldwide delivery enquiries.